Ing. František Špalek, Ph.D.

PETRŮ, Jana, Tomáš ZLÁMAL, František ŠPALEK a Robert ČEP. SURFACE MICROHARDENING STUDIES ON STEELS AFTER HIGH FEED MILLING. Advances in science and technology-research journal. Lublin: Lublin University of Technology, 2018, 12(2), s. 222-230. ISSN 2299-8624.

HAJNYS, J., M. PAGAC, J. MESICEK, J. PETRU a F. SPALEK. Research of 316L Metallic Powder for Use in SLM 3D Printing. Advances in Materials Science [online]. 2020, 20(1), 5-15 [cit. 2022-01-19]. ISSN 2083-4799. Dostupné z: doi:10.2478/adms-2020-0001

HAŠOVÁ, Slavomíra, Luboslav STRAKA a František ŠPALEK. Impact assessment of input factors on tool electrode wear in die sinking EDM of Steel EN43CrMo4. Materials Structure & Micromechanics of Fracture. Zürich: Trans Tech Publications, 2017, 756(1), s. 127-135. ISBN 978-3-03835-719-3.

MRKVICA, Ivan, František ŠPALEK a Tomáš SZOTKOWSKI. Influence of Cutting Tool Wear when Milling Inconel 718 on Resulting Roughness. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2018, 18(3), s. 547-461. ISSN 1213-2489.

ŠPALEK, František, Marek SADÍLEK, Robert ČEP, Jana PETRŮ, Jiří KRATOCHVÍL a Tomáš ČEGAN. Difference between cutting surface of Al foam and solid Al machined by WEDM technology. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2017, 17(5), s. 853-858. ISSN 1213-2489.

HILŠER, Ondřej, Stanislav RUSZ, Lucie KREJČÍ a František ŠPALEK. Grain refinement of extruded AZ31 magnesium alloy by ECAP process. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2017, 63(1), s. 31-37. ISSN 1210-0471.

ŠPALEK, František, Jana PETRŮ, Tomáš ZLÁMAL, Ivan MRKVICA, Robert ČEP a Jiří KRATOCHVÍL. Electro-Erosive Wire Cutting of Aluminum Foam. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2016, 16(2), s. 449-453. ISSN 1213-2489.

Článek nehodnocený:

WOJTYŁA, Mirosław, Lenka ČEPOVÁ a František ŠPALEK. Współpraca transgraniczna w nauczaniu metrologii współrzędnościowej. MECHANIK-Miesiecznik Naukowo-Techniczny. 2017, 2017(12/2017), s. 1160-1163. ISSN 0025-6552.

Příspěvek ve sborníku:

MICHALSKI, Jakub, Jakub TILL, Jana PETRŮ, František ŠPALEK, Stanislav RUSZ a Jiří ŠVEC. The effect of severe plastic deformation on the mechanical properties and structure of brass. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 419-425. ISBN 978-80-87294-84-0.

TILL, Jakub, Jakub MICHALSKI, Jana PETRŮ a František ŠPALEK. Utilization of the process of severe plastic deformation in increasing the quality of the CU sheet metal strip. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 487-494. ISBN 978-80-87294-84-0.

ČEGAN, Tomáš, Ivo SZURMAN, František ŠPALEK, Stanislav ZIENTEK, Jiřina VONTOROVÁ a Václav STRUNG. Microstructural stability of fully lamellar Ti-45Al-5Nb-0.2B-0.75C alloy. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 1676-1681. ISBN 978-80-87294-79-6.

HILŠER, Ondřej, František ŠPALEK, Stanislav RUSZ, Dariusz KUC, Eugeniusz HADASIK a Przemysław SNOPIŃSKI. Lithium containing AZ31 magnesium alloy processed by ECAP. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 1738-1745. ISBN 978-80-87294-79-6.

TROCHTA, Miroslav, Zdeněk FOLTA, František ŠPALEK a Miroslav BURIÁN. Solution of the Measuring Error Problem Caused by Torsional Vibration of Sensor. In: ICMD 2016: book of proceedings of the 57th International Conference of Machine Design Departments : Orea Resort Horizont, Železná Ruda, Czech Republic, September 7-9, 2016. Plzeň: Vydavatelství Západočeské univerzity v Plzni, 2016. s. 463-468. ISBN 978-80-261-0609-8.

ŠPALEK, František, Jana PETRŮ, Miroslav TROCHTA, Slavomíra HAŠOVÁ a Sergej HLOCH. DEPENDENCE OF MANUFACTURING PRECISION OF WEDM CUTTING TECHNOLOGY ON POROSITY OF ALUMINUM FOAM. In: METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 1534-1539. ISBN 978-80-87294-66-6.

ČEGAN, Tomáš, Stanislav ZIENTEK, Martin NOSKO, Martin POHLUDKA, Lukáš HORSÁK a František ŠPALEK. Characterisation of structural and compressive properties of aluminium foam Alporas. In: METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 1362-1367. ISBN 978-80-87294-67-3. Příspěvek ve sborníku nehodnocený

HILŠER, Ondřej, František ŠPALEK, Radek ČADA, Stanislav RUSZ a Lucie KREJČÍ. EN AW-3003 aluminium alloy subjected to Equal Channel Angular Pressing. In: ERIN 2017 : proceedings of the 11th international conference for Young Researchers and PhD students : May 17-18, 2017, Ústí nad Labem, Czech Republic. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2017. s. 214-220. ISBN 978-80-7561-056-0.

Zpráva:

SKOTNICOVÁ, Kateřina, Tomáš ČEGAN, Miroslav VACULÍK, Jan JUŘICA, Lukáš HORSÁK, Martin KRAUS, František ŠPALEK a Kateřina DĚDKOVÁ. Komplexní analýza kovo-keramických frikčních kompozitů na bázi Cu. Diafrict Components, s.r.o., 2017.